Introduction
XJM-S Flotation machine is mainly used for the coal slime flotation less than 0.5mm, it is the mechanical agitation, its principle is to use the slurry and air created by the negative pressure from the rotation of impeller in the impeller suction, makes them evenly mixed in the pharmacy, and use the different bubble adsorbability from the coal and impurities adsorbed to reach the separation purposes.
Main Features
1.Short magnetic circuit
2.Little magnetic flux leakage
3.High magnetic intensity
4.Low energy consumption
Working principle
Flotation cell machine has the advantages of large air-absorption capacity and low energy consumption. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively.
Technical parameters
XJM-S Flotation machine is mainly used for the coal slime flotation less than 0.5mm, it is the mechanical agitation, its principle is to use the slurry and air created by the negative pressure from the rotation of impeller in the impeller suction, makes them evenly mixed in the pharmacy, and use the different bubble adsorbability from the coal and impurities adsorbed to reach the separation purposes.
Main Features
1.Short magnetic circuit
2.Little magnetic flux leakage
3.High magnetic intensity
4.Low energy consumption
Working principle
Flotation cell machine has the advantages of large air-absorption capacity and low energy consumption. There is self-control device on the surface of mineral slurry, so it is easy to adjust it. The impeller has backward-inclined upper and lower vanes, which produce upper and lower circulation of mineral slurrry respectively.
Technical parameters
Model | XJM-2.5 | XJM-4 | XJM-6 | XJX-T8 | XJX-T12 | |
Capacity (t/m3/h) |
~1 | ~1 | 0.8~1.2 | 0.8~1.2 | 0.8~1.2 | |
Single Slot | Depth/mm | 1100 | 1100 | 1200 | 13500 | 1600 |
Bottom Size/mm | 1400×1400 | 1800×1800 | 2200×2200 | 2200×2200 | 2600×2500 | |
Upper Size mm |
1400×2300 | 1800×2730 | 2200×3110 | 2200×3300 | 2600×3600 | |
Volume(m3) | 2.5 | 4 | 6 | 7.9~8.5 | 12 | |
Slot/pc | 4 or 6 | 4 or 6 | 5 | 4~6 | 4~5 | |
Impeller | Dia./mm | 400 | 500 | 600 | 660 | 760 |
Speed(r/min) | 430 | 390 | 340 | - | - | |
Liner Speed(M/S) | 8.7 | 10 | 10.7 | 8.6 | 8.8 | |
Impeller Motor Power/kw | 7.5 | 11 | 18.5 | 30 | 37 | |
Scraper Motor Power/kw | 1.1 | 1.1 | 2.2 | 1.94 | 1.94 | |
Scraper Speed (r/min) |
23 | 33 | 33 | 33.3 | 33.3 | |
Weight (kg/slots) | 7020/4 | 15500/6 | 20632/5 | 21800/5 | 31000/5 |